Kondasin International Co.,Ltd.
Quality change the world
Add to Cart
Anchor Drilling Rig High torque Long Stroke Full Hydraulic Simple In Structure
1. YG-30 drilling rig is a full hydraulic drill which is used for drilling anchor holes in deep base pit of high building, anchor and reinforce side-slope for water conservatory project, water power station project, railways and highways . Especially used for drilling anchor holes in high position side-slope protection and drainage holes.
2. It has great drilling capability, wide range of application, rapid drilling speed and high drilling efficiency.It is composed of main set, control panel and pump which are connected together with flexible joint. So it features simple in structure, good disassembility and convenient to mount and transport
3. Rig structure is separate group design, It is composed of main set, control panel and pump which are connected together with flexible joint. So it features simple in structure, assures good disassembling, rapid and convenient mount and transport, best working environment and lower labor strength.
| Hole depth | 30-40m |
| Hole Diameter | Φ80-130 mm |
| Output speed of power head | 24 -114 r/min |
| Power Head Output Torque | 1500 Nm |
| Hole angle range | 0-360° |
| Power Head Feeding Stroke | 1800 mm |
| Max. Power Head Lifting Capability | 30kN |
| Max. Power Head Thrust Force | 15kN |
| Mast Sliding Compensating Stroke | 500 mm |
| Drill rod specification | Ø50×1500 mm Ø73×1500 mm |
| Overall dimension(transport state)(mm | 2700×1150×1400 mm |
| Electromotor power (kW) | 15 |
| Weight (kg) | 550 (3 parts) |
1. The power head has large torque,long stoke and high working efficiency.
2. Operating drill through the centralized control panel ensures assure safety operation and on-site cleanliness.
3. Rig structure is separate group design:main frame,pump station and control station, it assures good disassembling, rapid and convenient mount and transport, best working environment and lower labor strength.
4. Transmission has two speed range high and low. It can meet the requirements of both DTH hammer drilling and carbide bit drilling.
5. The power head has large torque,long stoke and high working efficiency.
6. Hydraulic part is an international famous brand product which ensures drilling rig's high stable and permanence stability.