Kondasin International Co.,Ltd.
Quality change the world
Add to Cart
Geothermal Engineering Rig Anchor Drilling Rig Full Hydraulic Water Well Winch
YGL-100R drilling rig is one type of full hydraulic crawler drilling rig,this rig can be installed with a rod lifting device (optional) to join drill rods.
The type of the rig is mostly applied in drilling work of Geothermal hole, also can be used in drilling the drain hole and large tonnage prestressed anchoring hole of the geotechnical engineering such as the side slope of dam construction, railways, highways, etc.; the guiding hole of high pressure jet grouting in gravel area; the blast hole; the anchoring hole of high buildings deep basement foundation; the anti-floating anchoring hole; the foundational reinforcing hole of interior architecture; the grouting reinforcing hole; the reinforcinghole of road or dam foundation; and the anchoring hole of landslide preventing.
The great rotary torque and long feeding stroke distance of the drilling rig make the speed of borehole faster, the disposal capability of accident better and efficiency of drilling work higher.
| Drilling depth (m) | 150 ~ 60 |
|---|---|
| drill size (mm) | Ф150 ~ 250 |
| Drilling diameter (mm) | Ф89 × 3000, Ф127 × 3000 |
| power head output speed (positive and negative) (rpm) | 40/80 |
| power head maximum output torque (Nm) | 6000 |
| Power head stroke (mm) | 3500 |
| power head maximum pull force (kN) | 55 |
| Power Head biggest feeding force (kN) | 40 |
| mast slip stroke (mm) | 500 |
| car slewing angle (°) | 360 ° |
| gradeability (°) | 20 ° |
| Diesel Power (kW) | 75 |
| Motor Power (kW) | 37 |
| rig outside dimensions (transport status) (mm) | about 5800 × 2200 × 2300 |
| Rig mass (kg) | about 5000 |
| Options | a) 1 ton tool winch (and crane); b) BW-250 Mud Pump; c) wet dust removal device; d) drill mention cited device; e) high-speed fourth gear power head: 180rph |
1. The gearshift mechanism of top drive power head adopts the hydraulic shift method which has the strongpoint of the quickness, convenience, reliability, etc. of the gearshift.
2. The hydraulic clamp & wrench device enormously decreases the assistant time and also reduces the intensity of operating work.
3. The equipment is mounted on the track chassis with the turning platform mechanism which makes the moving and walking more and more convenient.
4. The drilling rig is suitable for a variety of drill technique and methods, such as the rotary drill, auger drill, air drive DTH hammer impact and so on.
5. The rig can be installed with a rod lifting device (optional) to join drill rods.